From: Gilles Maillet (eamtmail@gmail.com)
Date: Tue Feb 08 2011 - 14:09:36 EST
Are there reel-to-reel tape decks in that studio?
On Tue, Feb 8, 2011 at 2:05 PM, Joel Lavoie <joel.lavoie@hotmail.com> wrote:
> I never have blown tweeters from powered speaker but in a passive PA. It
> was caused by an error in crossover outputs connections. Do you have an idea
> of what caused your problem? Maybe I can help you starting from there.
>
>
> Le 8 févr. 2011 à 18:55, Kevin Austin a écrit :
>
>
> Have you ever blown tweeters? If so, how?
>
> Kevin
>
>
>
> On 2011, Feb 8, at 12:23 PM, James Phelps wrote:
>
> I'll be interested to learn how this happened when/if you find out. I use
> exclusively powered speakers here - MANY!
>
> -Jim
>
>
> --- On *Tue, 2/8/11, Kevin Austin <kevin.austin@videotron.ca>* wrote:
>
>
> From: Kevin Austin <kevin.austin@videotron.ca>
> Subject: Re: Fried drivers
> To: cec-conference@concordia.ca
> Date: Tuesday, February 8, 2011, 11:18 AM
>
>
> We've lost four in a couple of weeks, Focal and Adams. ?
>
> I would imagine that these are bi- and tri- amped speakers, so the
> cross-over occurs before the amp. ¿¿
>
> Kevin
>
>
>
> On 2011, Feb 8, at 11:55 AM, Joel Lavoie wrote:
>
> > Yes, actually the problem could be in the crossover of the speaker. Maybe
> a resistor or a capacitor burned (bad quality?) and It let the full range
> sound go into the tweeter...
> >
> > Tweeter + low frequency = Boom! (in most cases)
> >
> > Joel
> >
> > Le 8 févr. 2011 à 16:46, Kevin Austin a écrit :
> >
> >>
> >> Could I get some of the thinking on a technical (speaker) issue.
> >>
> >> Powered speakers. How is it possible to design a powered speaker that
> can burn or fry the tweeter? Is this a case of poor design?
> >>
> >>
> >>
> >>
> >> Kevin
> >>
> >
>
>
>
>
>
This archive was generated by hypermail 2.1.5 : Tue Feb 08 2011 - 14:15:11 EST